30 Years of Graffiti Layers Reveals Colorful Timeline #ArtTuesday

From blog.adafruit.com 4 years ago in Platforms Stores

via MyModernMet Ever look at a graffiti wall and wonder what would happen if you scraped off a bit of paint? Well, Imgur user Paul De Graaf saved you the trouble by chipping away at a wall of graffiti in the Netherlands. This is what he found. Over 30 years...

Articles from Adafruit Industries

Made in NYC 2/24/2021 Featuring RP2040 Chips and the Grand Central M4 #adafruit #manufacturing #rp2040

From blog.adafruit.com 12 hours ago in Platforms Stores

Made in NYC 2/24/2021 Featuring RP2040 Chips and the Grand Central M4Soldering the Grand Central M4 (0:03)Collected drops of melted solder (0:25)Original tester for 7-segment backpack (0:30)Big bag of diodes (0:41)Manufacturing line winding down (0:44)New tray of special chips (1:00)...

Wire Holder #3DThursday #3DPrinting

From blog.adafruit.com 12 hours ago in Platforms Stores

babaNmama shares: Wire Holder for dc 5.5 x 2.1 or 2.5 mm plug usingdownload the files on: https://www.thingiverse.com/thing:4715662 Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital...

Apple Magic Mouse 2 Wall Bracket #3DThursday #3DPrinting

From blog.adafruit.com 13 hours ago in Platforms Stores

ajgb23 shares: Apple Magic Mouse 2 Wall Bracket. Simple wall bracket for Apple Magic Mouse 2download the files on: https://www.thingiverse.com/thing:4712449 Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects...

Flat Cutting Tool #3DThursday #3DPrinting

From blog.adafruit.com 14 hours ago in Platforms Stores

Cagatay shares this great design for a flat cutting tool! It needs %100 infill, otherwise you will cut the shell on the first knife movedownload the files on: https://www.thingiverse.com/thing:4704196 Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing...

Paint Brush Holder #3DThursday #3DPrinting

From blog.adafruit.com 15 hours ago in Platforms Stores

madmatt41 shares: Paint brush holder to keep your brushes from rolling around the table. V design accommodates many brush sizes and shapes.download the files on: https://www.thingiverse.com/thing:4705597 Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion...

Pocket Operator Impostor Knobs and Crank #3DThursday #3DPrinting

From blog.adafruit.com 16 hours ago in Platforms Stores

kumodot shares:This in my take on little knobs and a Crank design that can rotate the entire extension without colliding with the knob on the side for the Teenage Engineering Pocket Operator. This is part of my 3D Printed Cased...

Stand for Grogu’s Toy Ball (Razor Crest control lever) #3DThursday #3DPrinting

From blog.adafruit.com 17 hours ago in Platforms Stores

mooslug shares: A stand for a Baby Yoda toy ball! It’s an attempt to make a screen accurate lever base as seen on the Razor Crest cockpit set. It features recesses for magnets in the bottom for attaching to metal...

mintyPi v3.5: Altoids Tin Gaming Handheld! #3DThursday #3DPrinting

From blog.adafruit.com 18 hours ago in Platforms Stores

wermy shares: This is the latest version of the mintyPi: a Raspberry Pi Zero-based gaming handheld that fits inside an Altoids mint tin. For more information on all the required parts and putting it together visit: https://sudomod.com/mintypi-v3-5/ If you want...

From the mail bag…

From blog.adafruit.com 19 hours ago in Platforms Stores

From the mail bag! Please pass my compliments and thanks on your designers for the Adafruit “Music Maker” MP3 Shield for Arduino w/3W Stereo Amp. After years of rats-nesting older MP3 shields to work with non-UNO boards, I got to...

Dog Coin Bank #3DThursday #3DPrinting

From blog.adafruit.com 19 hours ago in Platforms Stores

erwoong shares: No extra parts needed, which are can’t make with 3D printer such as metallic springs, bolts and etc. The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer’s condition. Please...