Open source LimeNET SDR computers run Ubuntu Core on Intel Core

From hackerboards.com 4 years ago in News

Lime Micro has launched three open source “LimeNET” SDR systems that run Ubuntu Core on Intel Core CPUs, including one with a new LimeNET QPCIe board. Lime Microsystems has gone to Crowd Supply to launch three fully open source LimeNET computers for software defined radio (SDR) applications. The systems run...

Articles from HackerBoards (LinuxGizmos)

PicoCoreMX8MP

From hackerboards.com 3 weeks ago in News

PicoCoreMX8MP is a tiny low-power module based on NXP's 1.8GHz i.MX8M Plus SoC. Key features include up to 8GB RAM, 32GB eMMC, 2x GbE, WiFi/BT, LVDS, MIPI CSI and DSI, USB, serial, audio, various GPIOs, and wide temperature operation.

MKR Windy

From hackerboards.com 3 weeks ago in News

MKR Windy is an Arduino MKR form-factor module based on an STM32WL SoC, which combines a Cortex-M4 MCU, 64KB SRAM, 256KB NAND, and a sub-GHz radio. The module supports LoRa, FSK, (G)MSK, and BPSK RF formats, offers USART, ADC, SPI,...

VAR-SOM-MX8M-PLUS

From hackerboards.com 3 weeks ago in News

The VAR-SOM-MX8M-PLUS module is based on NXP's i.MX8M Plus SoC, and up to 4GB RAM and 64GB eMMC. Key features include AI/ML NPU (2.3 TOPS), 2x GbE and WiFi/BT connectivity, and I/O including display, audio, camera, USB 2.0/3.0, PCIe, and...

Raspberry Pi Pico

From hackerboards.com 1 month ago in News

The tiny Raspberry Pi Pico module is based on the Raspberry Pi Foundation's own 133MHz dual-core Arm Cortex-M0+ based RP2040 SoC, plus 264KB RAM and 2MB flash. The module offers USB, UART, SPI, I2C, PWM, GPIO, and ADC I/O, and...

Evo M51

From hackerboards.com 1 month ago in News

The Evo M51 combines an Atmel SAMD51 MCU with an Intel MAX10 FPGA, and offers Adafruit Feather style form-factor, connectivity, and key features, including GPIO, analog I/O, and I2C, plus Arduino IDE support.

AL05P

From hackerboards.com 1 month ago in News

The AL05P Pico-ITX format SBC is based on Intel Apollo Lake SoCs and offers up to 4GB SDRAM and 64GB eMMC. I/O includes dual GbE, 4k60 MiniDP++, quad USB, GPIO, SMBus, and miniPCIe.

BeagleV

From hackerboards.com 1 month ago in News

A BeagleBoard.org SBC based on a 1.5GHz 64-bit SiFive U74 RISC-V processor, plus up to 8GB RAM and a microSD slot. Features include WiFi/BT, GbE, HDMI, MIPI CSI/DSI, audio I/O, 4x USB3.0, and 40-pin expansion.

Onion Omega2 Pro

From hackerboards.com 2 months ago in News

Omega2 Pro is an Omega2+ based SBC featuring a 580MHz MIPS CPU, 512MB RAM, 8GB eMMC, and microSD expansion. I/O includes WiFi, Ethernet, USB, UART, and 30-pin GPIO.

N1 SBC

From hackerboards.com 2 months ago in News

The N1 Mini-ITX SBC is based on NXP's LS1012 SoC, and features 2x GbE LAN, 3x USB3.0, 1x USB2.0, and 3x mini-PCIe interfaces. The board supports generic and OpenWRT Linux, and offers -40 to 85 deg. C operation.

Hackboard 2

From hackerboards.com 3 months ago in News

Hackboard 2 integrates a 2.8GHz dual-core Celeron N4020 SoC, plus 4GB RAM and 64GB eMMC. Key features include WiFi/BT/GbE connectivity, 3x USB3 ports, 2x M.2 NVMe slots, and Raspberry Pi HAT support.