Tiny, open-spec quad -A53 SBC offers GbE and wireless for $30

From hackerboards.com 4 years ago in News

FriendlyElec’s “NanoPi M2A” SBC combines the quad -A53 Samsung SoC of the NanoPi M2 with the more advanced footprint, layout, and features of the NanoPi M3. FriendlyElec (FriendlyARM) has released a community-backed, open source “NanoPi M2A” SBC that replaces the earlier NanoPi M2, which is now out of stock. The...

Articles from HackerBoards (LinuxGizmos)

PicoCoreMX8MP

From hackerboards.com 2 weeks ago in News

PicoCoreMX8MP is a tiny low-power module based on NXP's 1.8GHz i.MX8M Plus SoC. Key features include up to 8GB RAM, 32GB eMMC, 2x GbE, WiFi/BT, LVDS, MIPI CSI and DSI, USB, serial, audio, various GPIOs, and wide temperature operation.

MKR Windy

From hackerboards.com 3 weeks ago in News

MKR Windy is an Arduino MKR form-factor module based on an STM32WL SoC, which combines a Cortex-M4 MCU, 64KB SRAM, 256KB NAND, and a sub-GHz radio. The module supports LoRa, FSK, (G)MSK, and BPSK RF formats, offers USART, ADC, SPI,...

VAR-SOM-MX8M-PLUS

From hackerboards.com 3 weeks ago in News

The VAR-SOM-MX8M-PLUS module is based on NXP's i.MX8M Plus SoC, and up to 4GB RAM and 64GB eMMC. Key features include AI/ML NPU (2.3 TOPS), 2x GbE and WiFi/BT connectivity, and I/O including display, audio, camera, USB 2.0/3.0, PCIe, and...

Raspberry Pi Pico

From hackerboards.com 1 month ago in News

The tiny Raspberry Pi Pico module is based on the Raspberry Pi Foundation's own 133MHz dual-core Arm Cortex-M0+ based RP2040 SoC, plus 264KB RAM and 2MB flash. The module offers USB, UART, SPI, I2C, PWM, GPIO, and ADC I/O, and...

Evo M51

From hackerboards.com 1 month ago in News

The Evo M51 combines an Atmel SAMD51 MCU with an Intel MAX10 FPGA, and offers Adafruit Feather style form-factor, connectivity, and key features, including GPIO, analog I/O, and I2C, plus Arduino IDE support.

AL05P

From hackerboards.com 1 month ago in News

The AL05P Pico-ITX format SBC is based on Intel Apollo Lake SoCs and offers up to 4GB SDRAM and 64GB eMMC. I/O includes dual GbE, 4k60 MiniDP++, quad USB, GPIO, SMBus, and miniPCIe.

BeagleV

From hackerboards.com 1 month ago in News

A BeagleBoard.org SBC based on a 1.5GHz 64-bit SiFive U74 RISC-V processor, plus up to 8GB RAM and a microSD slot. Features include WiFi/BT, GbE, HDMI, MIPI CSI/DSI, audio I/O, 4x USB3.0, and 40-pin expansion.

Onion Omega2 Pro

From hackerboards.com 2 months ago in News

Omega2 Pro is an Omega2+ based SBC featuring a 580MHz MIPS CPU, 512MB RAM, 8GB eMMC, and microSD expansion. I/O includes WiFi, Ethernet, USB, UART, and 30-pin GPIO.

N1 SBC

From hackerboards.com 2 months ago in News

The N1 Mini-ITX SBC is based on NXP's LS1012 SoC, and features 2x GbE LAN, 3x USB3.0, 1x USB2.0, and 3x mini-PCIe interfaces. The board supports generic and OpenWRT Linux, and offers -40 to 85 deg. C operation.

Hackboard 2

From hackerboards.com 2 months ago in News

Hackboard 2 integrates a 2.8GHz dual-core Celeron N4020 SoC, plus 4GB RAM and 64GB eMMC. Key features include WiFi/BT/GbE connectivity, 3x USB3 ports, 2x M.2 NVMe slots, and Raspberry Pi HAT support.