Ubuntu-driven TurtleBot gets a major rev with a Pi or Joule in the driver’s seat

From hackerboards.com 4 years ago in News

A new TurtleBot3 rev of the open source, Ubuntu/ROS-based robot kit is available in “Burger” and “Waffle” models with an RPi 3 or Intel Joule, respectively. The “world’s most popular open source robot for education and research” has received a major upgrade with two modular TurtleBot3 models from Open Robitics...

Articles from HackerBoards (LinuxGizmos)

Jetson TX2 NX

From hackerboards.com 3 days ago in News

The Jetson TX2 NX module, based on Nvidia's 2GHz hexacore Tegra x2 SoC, offers up to 2.5 times the performance of the Jetson Nano module, and is form-factor and pin compatible with both the Jetson Nano and Xavier NX modules.

XPI-S905X

From hackerboards.com 3 days ago in News

The XPI-S905X is a Raspberry Pi style SBC based on the 1.5GHz quad-core Amlogic S905X SoC, plus up to 4GB RAM and 32GB eMMC. Ports include 4K video in/out, 10/100 LAN, microSD slot, 4x USB, optional WiFi, and RPi style...

XPI-3288

From hackerboards.com 4 days ago in News

The XPI-3288 is a Raspberry Pi style SBC based on a 1.6GHz quad-core Rockchip RK3288 SoC, 2GB RAM, up to 32GB eMMC, and microSD expansion. Key features include WiFi, GbE, HDMI, 4x USB, and 40-pin RPi-style GPIO.

PicoCoreMX8MP

From hackerboards.com 4 weeks ago in News

PicoCoreMX8MP is a tiny low-power module based on NXP's 1.8GHz i.MX8M Plus SoC. Key features include up to 8GB RAM, 32GB eMMC, 2x GbE, WiFi/BT, LVDS, MIPI CSI and DSI, USB, serial, audio, various GPIOs, and wide temperature operation.

MKR Windy

From hackerboards.com 4 weeks ago in News

MKR Windy is an Arduino MKR form-factor module based on an STM32WL SoC, which combines a Cortex-M4 MCU, 64KB SRAM, 256KB NAND, and a sub-GHz radio. The module supports LoRa, FSK, (G)MSK, and BPSK RF formats, offers USART, ADC, SPI,...

VAR-SOM-MX8M-PLUS

From hackerboards.com 4 weeks ago in News

The VAR-SOM-MX8M-PLUS module is based on NXP's i.MX8M Plus SoC, and up to 4GB RAM and 64GB eMMC. Key features include AI/ML NPU (2.3 TOPS), 2x GbE and WiFi/BT connectivity, and I/O including display, audio, camera, USB 2.0/3.0, PCIe, and...

Raspberry Pi Pico

From hackerboards.com 1 month ago in News

The tiny Raspberry Pi Pico module is based on the Raspberry Pi Foundation's own 133MHz dual-core Arm Cortex-M0+ based RP2040 SoC, plus 264KB RAM and 2MB flash. The module offers USB, UART, SPI, I2C, PWM, GPIO, and ADC I/O, and...

Evo M51

From hackerboards.com 2 months ago in News

The Evo M51 combines an Atmel SAMD51 MCU with an Intel MAX10 FPGA, and offers Adafruit Feather style form-factor, connectivity, and key features, including GPIO, analog I/O, and I2C, plus Arduino IDE support.

AL05P

From hackerboards.com 2 months ago in News

The AL05P Pico-ITX format SBC is based on Intel Apollo Lake SoCs and offers up to 4GB SDRAM and 64GB eMMC. I/O includes dual GbE, 4k60 MiniDP++, quad USB, GPIO, SMBus, and miniPCIe.

BeagleV

From hackerboards.com 2 months ago in News

A BeagleBoard.org SBC based on a 1.5GHz 64-bit SiFive U74 RISC-V processor, plus up to 8GB RAM and a microSD slot. Features include WiFi/BT, GbE, HDMI, MIPI CSI/DSI, audio I/O, 4x USB3.0, and 40-pin expansion.