Electronics, DIY, Makers, Hackers and Internet of Things (IoT)
and follow @boarddb
2 months ago in Blogs
The SBC-U1 is a tiny SBC based on an ESP32 module plus 384KB RAM, 4MB built-in flash, and microSD expansion. Interfaces include WiFi/Bluetooth connectivity and a 20-pin expansion header with GPIO, analog in/out, I2C, and SPI.
The AECX-V1K1 is a 3.5-inch format SBC based on AMD's high performance quad-core Ryzen Embedded V1000 SoC, and up to 8GB RAM. Key features include UHD video, SP/DIF, SATA III, GbE LAN, 5x USB ports, and miniPCIe expansion.
The EMH6 SBC is based on the quad-core Allwinner H6 SoC along with 1GB RAM, 8GB eMMC, and both microSD and M.2 NVMe slots. Other features include WiFi/BT plus multiple LAN, A/V, USB, GPIO, and PCIe interfaces.
The UP Xtreme i11 SBC features Intel's 11th Gen Core and Celeron SoCs, and up to 64GB SODIMM RAM. I/O includes SATA 3.0, multiple display, LAN, USB, serial, and M.2 ports, plus 40-pin expansion and optional mini-PCIe.
The credit-card sized U5C SBC is based on NXP's i.MX6ULL SoC, along with 512MB RAM and up to 1GB storage. Key features include 100Mbps Ethernet, WiFi/BT, RGB video, 3.5mm audio jack, USB, CAN, serial, and microSD and Raspberry Pi-style expansion.
The APIX-KBL7 is a Pico-ITX style SBC based on Intel's 7th-Gen Core i7/i5/i3 and Celeron SoCs, and up to 16GB SO-DIMM RAM. Interfaces include SATA, GbE LAN, 4k HDMI, LVDS, audio I/O, 5x USB, UART, M.2, and expansion signals including...
The OK1028A-C SBC is based on an NXP LS1028A SoC, plus 2GB RAM, 8GB eMMC, and an SD slot. I/O includes SATA, LAN, USB, display, USB, UART, CAN, GPIO, and both M.2 and mini-PCIe expansion.
3 months ago in Blogs
The iW-Rainbow G34M/G37M-Q7 are µQseven style SoMs based on NXP's i.MX8M Mini and Nano SoCs. The modules feature 2GB+ RAM and 8GB+ eMMC storage, along with WiFi, GbE, LVDS/HDMI, USB, PCIe, GPIO, and various options.
The Jetson Nano 2GB Developer Kit features a quad-core Cortex-A57 CPU, 128-core GPU, 2GB RAM, and microSD storage. I/O includes GbE, WiFi, HDMI, MIPI-CSI, USB, and 40-pin expansion.
4 months ago in Blogs
The Portenta H7, based on a dual-core STM32H747 SoC, runs Arduino sketches on Arm Mbed OS. The SBC offers WiFi/BT, video, LAN, UART, SPI, I2C, and GPIO interfaces, and debuts a new 160-pin Arduino expansion standard.
The conga-PA7 is a pico-ITX form-factor SBC based on Intel x6000E and J Series SoCs, and featuring up to 16GB RAM and 512GB flash storage, plus multiple multimedia, GbE, USB, M.2, and serial ports.
The DR4029, based on Qualcomm's IPQ4029 SoC, targets a wide range of wireless applications. The board features 2x GbE ports, dual-band WiFi, 2x mini-PCIe sockets, 2x SIM card slots, and a microSD slot.
The XPI-3128 SBC is based on a quad-core Rockchip RK3128 SoC, plus up to 2GB RAM and 64GB eMMC. I/O includes WiFi/BT, 100Mbps LAN, 1080p display, and Raspberry Pi style 40-pin GPIO.
This fanless, Pico-ITX SBC, based on an Atom x5-E3940 SoC, offers up to 8GB RAM, HDMI, GbE, 4x USB, mini-PCIe expansion with mSATA support, and wide temperature operation.
The 3.5-inch style IB32 SBC is based on an Intel Celeron N2930 SoC. Features include LVDS, VGA, optional HDMI, GbE, SATA II, mini-PCIe, mSATA SSD, and I/O including USB, RS232/422/485, Firewire, and GPIO.
5 months ago in Blogs
The credit-card sized Chameleon96 is a 96Boards CE style SBC based on the Intel (formerly Altera) Cyclone V FPGA SoC with dual 800MHz ARM Cortex-A9 cores. The SBC meets 96Boards CE required specs except for MIPI SDI, and offers I/O...
An IoT development board built around Espressif’s ESP32-S2 WROVER or WROOM SoCs, based on a 32-bit 240MHz Xtensa LX7 CPU. The dev board provides 2MB RAM, 4MB flash, WiFi, and numerous GPIOs, and interfaces via a dual-row header to custom...
The Winmate FA30 is a 3.5-inch style SBC based on an NXP i.MX6 SoC, with up to 2GB RAM, 16GB eMMC, a microSD slot, and miniPCIe expansion. I/O includes GbE LAN, audio and video interfaces, and multiple USB, UART, and...
Geniatech's Developer Board 4 V3 is a 96boards CE style SBC based on a Snapdragon 410E SoC, with 2GB DDR3 RAM and 16GB eMMC storage. I/O includes HDMI, MIPI-CSI, WiFI, BT, GbE, and GPS, plus 40- and 60-pin expansion headers.
Geniatech’s Developer Board 4 V3 is a 96boards CE style SBC based on a Snapdragon 410E SoC, with up to 2GB DDR3 RAM and 16GB eMMC storage. I/O includes HDMI, MIPI-CSI, WiFI, BT, GbE, and GPS, plus 40- and 60-pin...
The SwiftIO SBC is based on an NXP i.MX RT1052 SoC with a 600MHz Cortex-M7 core. Features include 32MB RAM, 8MB flash, an microSD slot and I/O including GPIO, ADC, PWM, serial, and more. It runs Zephyr RTOS and includes...
The ZynqBerryZero is a tiny SoC module based on the Xilinx Zynq-7010 FPGA, in a Raspberry Pi Zero form-factor. Features include 512MB RAM, 16MB Flash, 2x microUSB, miniHDMI, MIPI-CSI-2, and 40-pin expansion with 26x GPIO.
The PicoCore RT1 is based on the NXP i.MX RT1050 "crossover" SoC, which uses a 600MHz-clocked Cortex-M7 core as its primary processor. The module offers on-board RAM and flash, plus 2x 80-pin expansion connectors with A/V, LAN, USB, SDIO, GPIO,...