The ND108T is a Pico-ITX SBC based on the NXP i.MX8M SoC, with up to 4GB RAM and 32GB eMMC. I/O includes 4K/60fps HDMI and LVDS video, 2x USB3.0, 2x GbE, audio and serial ports, plus Raspberry Pi compatible 40-pin...

The AI-oriented FZ5 Card, claimed to offer 2.4TOPS computing power, is based on the Xilinx Zynq UltraScale+ ZU5EV MPSoC, with 4x Cortex-A53 and 2x Cortex-R5 cores, plus an FPGA fabric. Interfaces include TF, GbE, video in/out, 4x USB, UART, and...

The Banana Pi BPI-M5 SBC, based on the 2.0GHz quad-core Amlogic S905X3 SoC, features 4GB RAM, 16G eMMC, microSD, HDMI, 3.5mm audio, GbE LAN, 4x USB3.0, and 40-pin Raspberry Pi style expansion.

The MaaXBoard SBC, based on the NXP i.MX8M SoC, offers up to 2GB RAM and 64GB eMMC, plus I/O including SDIO, GbE, WiFi, BT, HDMI, camera, USB, UART, SDIO, and 40-pin Raspberry Pi style expansion.

The router-oriented DR6018 V2 SBC, based on a Qualcomm-Atheros IPQ6010 SoC, 1GB RAM, and 256MB NAND flash, offers 5x LAN ports, optional WiFi and 5G modules, mini-PCIe and SD expansion, USB 2.0/3.0 ports, and lots of GPIOs.

ODROID-N2+ is a speed and RAM upgrade to the ODROID-N2 SBC. This enhanced model increases the clock rate of the 4x Cortex-A73 cores from 1.8GHz to 2.4GHz, and that of the 2x Cortex-A53 cores from 1.9GHz to 2.0GHz. Additionally, the...

The ATMegaZero uses the Atmel ATMega32U4 SoC, the same core found on the Arduino Leonardo and Micro SBCs, but adopts a Raspberry Pi Zero style form-factor and a unique 40-pin GPIO expansion pinout.

An IoT development board built around Espressif's ESP32-S2 WROVER or WROOM SoCs, based on a 32-bit 240MHz Xtensa LX7 CPU. The dev board provides 2MB RAM, 4MB flash, WiFi, and numerous GPIOs, and interfaces via a dual-row header to custom...

The IQ30 is a 3.5-inch form-factor SBC based on the 2.2GHz octa-core Qualcomm Snapdragon 660 SoC, along with up to 4GB RAM and 32GB eMMC. I/O includes LVDS, optional eDP, WiFi, BT, UART, 3x USB, M.2, and a microSD slot.

NanoSOM nS02 is a tiny module based on the STMicroelectronics STM32MP1 SoC, featuring 2x Cortex-A7 cores, an M4 MPU core and a 3D GPU. Features include up to 1GB RAM, 32GB eMMC, SD card support, 10/100Mbps LAN, numerous GPIOs, and...

NanoSOM nS02 is a tiny module based on the STMicroelectronics STM32MP1 SoC, featuring 2x Cortex-A7 cores, an M4 MPU core and a 3D GPU. Features include up to 1GB RAM, 32GB eMMC, SD card support, 10/100Mbps LAN, numerous GPIOs, and...

The SwiftIO MCU SBC is based on an NXP i.MX RT1052 SoC with a 600MHz Cortex-M7 core. Features include 32MB RAM, 8MB flash, a microSD slot, and I/O including GPIO, ADC, PWM, serial, and more. It runs Zephyr RTOS and...

The ZynqBerryZero is a tiny SoC module based on the Xilinx Zynq-7010 FPGA, in a Raspberry Pi Zero form-factor. Features include 512MB RAM, 16MB Flash, 2x microUSB, miniHDMI, MIPI-CSI-2, and 40-pin expansion with 26x GPIO.

The ODYSSEY - X86J4105 SBC combines an Intel Celeron SoC with an ATSAMD21 Cortex-M0+ MCU, offering Arduino compatibility on an x86 platform. Features include up to 8GB RAM, eMMC, microSD, USB, GbE, WiFi/BT, graphics, audio, and Raspberry Pi expansion.

The Odyssey - X86J4105 SBC combines an Intel Celeron SoC with an ATSAMD21 Cortex-M0+ MCU, offering Arduino compatibility on an x86 platform. Features include up to 8GB RAM, eMMC, microSD, USB, GbE, WiFi/BT, graphics, audio, and Raspberry Pi expansion.

The PicoCore RT1 is based on the NXP i.MX RT1050 "crossover" SoC, which uses a 600MHz-clocked Cortex-M7 core as its primary processor. The module offers on-board RAM and flash, plus 2x 80-pin expansion connectors with A/V, LAN, USB, SDIO, GPIO,...

The PicoCore RT1 is based on the NXP i.MX RT1050 “crossover” SoC, which uses a 600MHz-clocked Cortex-M7 core as its primary processor. The module offers on-board RAM and flash, plus 2x 80-pin expansion connectors with A/V, LAN, USB, SDIO, GPIO,...

The Wandboard i.MX8M Plus is based on an NXP i.MX8M Plus SoC, with 4x Cortex-A53 cores, a Vivante GPU, a camera ISP, and an AI co-processor. It comes with up to 4GB RAM and 32GB eMMC, plus GbE, WiFi/BT, micro-SD...

SanCloud BeagleBone Enhanced is a joint effort by BeagleBoard.org and SanCloud. It is based on the open-source hardware design of BeagleBone Black with upgraded Ethernet speed (GbE), RAM (GB), a USB hub, built-in sensors, and a WiFi/BT option.

SanCloud BeagleBone Enhanced is a joint effort by BeagleBoard.org and SanCloud. It is based on the open-source hardware design of BeagleBone Black with upgraded Ethernet speed (GbE), RAM (GB), a USB hub, built-in sensors, and a WiFi/BT option.

The Rock Pi E is a compact SBC based on the 64-bit quad-core Rockchip RK3328 SoC. Features include up to 4GB RAM, microSD and eMMC storage, and I/O including USB 3.0, dual Ethernet, WiFi/BT wireless, and 40-pin RPi-style expansion.

Tiny1284P is a tiny dev board based on the 16MHz-clocked ATmega1284P, featuring a USB Type-C connector for programming and power. Relative to comparable modules built with the ATmega328, it offers 4x flash, 8x RAM, 4x storage — plus, it leverages...

The Rock Pi E is a compact SBC based on the 64-bit quad-core Rockchip RK3328 SoC. Features include up to 4GB RAM, microSD and eMMC storage, and I/O including USB 3.0, dual Ethernet, WiFi/BT wireless, and 40-pin RPi-style expansion.

The UP Xtreme Lite SBC, from Aaeon, taps Intel’s 8th-gen Core i3/i5/i7 SoCs clocked up to 1.8GHz. Key features include 16GB RAM and I/O including SATA III and multiple GbE, M.2, USB, PCIe, audio, and serial interfaces, plus 40-pin expansion.

The Rock Pi 4 model C, based on the hexacore 1.8GHz-clocked Rockchip RK3399 SoC, offers 4GB LPDDR4. I/O includes 4K@60 HDMI, MIPI DSI and CSI, dual-band WiFi, BT 5.0, 3x USB, GbE, and a 40-pin expansion header.